Payment & Shipping Terms:
|Model:||SCR 72V/80A||Type:||Forklift Battery Charger|
|Output Voltage:||72V||Output Current:||80A|
|Warranty:||One Year||Phase:||Three Phases 380v|
|Battery Parameter:||72V 585-720 Ah||Size:||500x660x400 Mm|
SCR 72V 80A 3 Phase Forklift Charger , Pallet Jack Battery Charger Microprocessor Controlled
Phase: Three Phases
These 72 volt three phase Battery chargers are available in a variety of amperages, with selectable input voltage.
Forklift chargers are usually sized for amp output based on the amp hour capacity of the battery they are charging. There is some leeway here, but excessive deviation from the recommended unit can lead to shortened battery life or capacity due to overchargingc or sulfation.
These units are UL, CUL, CE approved, and have a four digit LCD display, indicating such things as real time delivered current, battery voltage before charging, delivered charge (ah), overall charge time, final voltage reached by battery.
They are microprocessor controlled, and dip switch programmable for automatic start, 8 value final charge timer, initial stage timer, equalizing charge.
They are fuse protected on the input, and DC output, and overload protected on the transformer. Excellent quality units.
This device would be applicable to recharge of lead-acid batteries which could be used in
various electric vehicle such as power pallet trucks, fork-lift truck, lift truck, electronic tour bus.
(Ah)Charge time per battery
Operation and safety
◆ It can be started and stopped by one key. Once it is started, it can charge automatically to the end without caring.
◆ It can display the charge information by pressing the information key.
◆ It has a switch for Wa or Wa+Eq to select the normal charge or normal with equalizing charge
◆ Detailed charge monitoring display
◆ Optimized design and compact structure. The main units are all specially produced with excellent safety.
◆ The charger can test the polarity and open-circuit automatically before charge and then alarm.
◆ Restrict the over-current and over-voltage and then alarm.
◆ The charger can be started and stopped at any time by pressing on/off key.
◆ The charger will inspect the temperature in the charger during run-time.
◆ It is controlled by micro-computer and it can judge a plenty of the abnomal conditions during charge to protect from overcharge.
◆ Electromagnetic compatibility and electrical safely conform to EC standards.
The soft cable it used has excellent flexibility and insulation.
Contact Person: Molly