Payment & Shipping Terms:
|Model:||SCR 72V/80A||Type:||Forklift Battery Charger|
|Output Voltage:||72V||Output Current:||80A|
|Application:||Electric Forklift Truck||Brand:||LAKER|
|Warranty:||One Year||Phase:||Three Phases 380v|
|Battery Parameter:||72V 585-720 Ah||Size:||550x690x500 Mm|
Diode Rectifier Automatic Forklift Battery Charger Industrial SCR 72V/80A
Phase: Three Phases
◆ This charger adopt the up-to-date SCM and serveal decades of charging experience to develop the SCR series of automatic intelligent charger,it is widely used for the flooded traction battery.
◆ It can carry out the normal charge and equalising charge automatically. It is suitable for single shift or multi shifts.
◆ Charge time between 8 and 12 hours
◆ It has a simple structure, reliable performance and lower operating and maintenance cost.Simple to operate.
This device would be applicable to recharge of lead-acid batteries which could be used in
various electric vehicle such as power pallet trucks, fork-lift truck, lift truck, electronic tour bus.
(Ah)Charge time per battery
◆ The charge process can be controlled intelligently with a microprocesser. optimized charge performance to get a excellent charge results.
◆ Wa+Equalising charge curves.
◆The temperature rising during the charge and the evaporating of the electrolyte at the end of charge can be restricted through the controlling the charge specifications,this can prolong the battery life and reduce the lost volume of water, so it can reduce the maintenance cost.
◆Intelligent, fully automatic.
◆The advance technology and excellent units guarantee the reliable quality and perfomance.
◆Self-diagnosis and display panel indicating operational conditions.
◆It can be selected to carry out normal charge or one equqlising charge after normal charge through the adjustment of the switch.
◆It can judge the polanrity reverse and open-circuit automatically then alarm.
High power factor and low power aberrance.
◆The voltage of the power source can be 220V,230V and 240V or 380V, 400V and 420V,10% deviation of the total power source voltage is allowed.
◆Supply frequency 50Hz, 60Hz.
Operation and safety
◆ It can be started and stopped by one key. Once it is started, it can charge automatically to the end without caring.
◆ It can display the charge information by pressing the information key.
◆ It has a switch for Wa or Wa+Eq to select the normal charge or normal with equalizing charge
◆ Detailed charge monitoring display
◆ Optimized design and compact structure. The main units are all specially produced with excellent safety.
◆ The charger can test the polarity and open-circuit automatically before charge and then alarm.
◆ Restrict the over-current and over-voltage and then alarm.
◆ The charger can be started and stopped at any time by pressing on/off key.
◆ The charger will inspect the temperature in the charger during run-time.
◆ It is controlled by micro-computer and it can judge a plenty of the abnomal conditions during charge to protect from overcharge.
◆ Electromagnetic compatibility and electrical safely conform to EC standards.
The soft cable it used has excellent flexibility and insulation.