SC175 175A Forklift Battery Connector, CE UL Certified, Yazaki Compatible, 600V

600 Volt 175 Amp Battery Connector CE UL Certification 100% Compatible With Yazaki

Model: SC175 bipolar fast plug connector

​

Product Specifications

Certified Performance: CE/UL with Phosphorous Bronze Contacts

For buyers who need paperwork as well as performance, the SC175 carries CE and UL certification and uses phosphorous bronze contacts chosen for their springiness and conductivity.

• CE and UL certified 175A connector
• Phosphorous bronze contacts for stable conductivity
• Yazaki-compatible mating, IP20

Frequently asked about this connector

Q: Is the SC175 certified?

A: Yes, it is CE and UL certified and designed to mate with Yazaki-compatible counterparts.

Q: What are the contacts made of?

A: Phosphorous bronze, chosen for good springiness and consistent conductivity.

Q: What is the SC175 rated for?

A: It is rated for 175A at up to 600V with silver-plated contacts.

Q: Where is it typically used?

A: On electric forklifts and warehouse trucks.

Q: What certifications does it carry?

A: It is CE, UL, TUV certified.

Q: What is the minimum order and lead time?

A: MOQ is negotiable; stock ships in 3–5 days and tailored goods in 5–7 days after the deposit is received.

Q: Are custom colors and private-label available?

A: Yes - standard colors or colors made to your requirements, and private-label orders are supported.

Replacing a Yazaki-Style Plug Without Rework

The SC175 is built to mate with the Yazaki-style connectors already on many forklift battery leads, so a worn plug can be cut off and replaced without touching the charger or the battery tray. The 175A contact pair, the body footprint and the handle mounting follow the same pattern.

Contacts are phosphorous bronze, chosen for spring retention over thousands of insertions rather than for a headline figure on a datasheet.

What the Replacement Actually Covers

Units are CE and UL marked, rated 600V with IP20 guarding, and built to the same body footprint as the original so the replacement arrives ready to fit. Cable entry accepts 4 AWG through 0/1 AWG, covering the leads used on most 24V to 80V forklift packs.

• Mates with Yazaki-style SC-series connectors already in service
• Phosphorous bronze contacts for stable spring retention
• CE and UL marked, 600V / IP20
• UL1977 standard, IP20 contact guarding

Retrofit Sequence That Avoids Downtime

Fit one unit as a trial on the truck with the most demanding duty cycle, confirm the latch engages and the cover closes, then roll the remainder of the fleet across at the next planned service. Stock units ship in three to five working days, which keeps a retrofit inside a single maintenance window.

Where a fleet mixes connector generations, the same SC family covers the SC350 and SC50 cable ranges, so one spare type can serve several truck sizes.

Before You Cut the Old Plug Off

Check the cable section first: 4 AWG to 0/1 AWG is the working range, and a lead that has already been trimmed twice may need a fresh length before a new terminal goes on. Confirm the charger is isolated, cut square, crimp to the terminal drawing and check the pull test before the body is closed.

If a fleet mixes Yazaki-style and other SC-series plugs, order the trial unit first and compare the latch feel against the part coming off the truck; that one comparison settles most fit questions before a batch order is placed.

Technical Parameters