LK-Cable-25 Perfect Type Lead-Acid Battery Connection Cable 25mm² Rubber Jacket Customized Centre Length for Forklift Battery Links

LK-Cable-25 Perfect Type Lead-Acid Battery Connection Cable

LK-Cable-25 is the 25 model of the LK-Cable perfect type series: a copper conductor inside, a rubber jacket outside, the centre length cut to your measurement, and CE marking. It is a lead-acid battery connection cable built to link cells, inter-cell connectors and charger leads reliably. Because battery compartments are small and access is tight, the jacket and the terminals have to survive frequent fitting and re-fitting.

The Perfect Type Construction

What the perfect type stands for

Perfect type is the construction standard used across the LK-Cable series: a high-strand-count copper conductor for current carrying, a rubber jacket for abrasion and acid resistance, a centre length measured from the machine rather than from a catalogue figure, and terminations that match the terminal bolt of the cell. Every model in the series is built to that same standard, so a lead ordered today behaves like the one ordered last year.

One construction, four models

The series is offered in four model options so the section can follow the load rather than the other way round.

Where the 25 sits in the range

LK-Cable-25 is the smallest section in the series, used for the shorter links inside a pack and on light-duty machines. Where the pack runs a higher current, the same perfect type construction continues in 35, 50 and 70, so the fit and the jacket behaviour stay familiar.

Replacement Without Guesswork

The old lead is the reference

Measure its centre length, note where it bends and which terminal it lands on, then order to that figure. Replacing a link with a slightly longer one is not a safety margin, it is a loop that will rub.

Four points before fitting

Terminal bolt size matches the lug, not adapted with a washer. Lead leaves each post without twist. Route clears the battery tray along the whole run. Torque re-checked after the first charge cycle.

Why the Length Is Specified Per Machine

The cable does not know the voltage; the machine does. What changes from one truck to another is the current path and the space around it. Some machines use shorter links in tight compartments, while others need a longer lead to reach the charger connection. That is why the length is specified per machine rather than by a voltage label. The failure pattern is the same everywhere, a loose terminal or a chafed jacket, and the checks are the same.

Applications

Replacement links on electric forklifts, pallet trucks and stackers, including packs rebuilt with a different cell supplier where the original lead no longer matches the route. The same perfect type construction covers higher-current packs in the 35, 50 and 70 models.

Selection and Compatibility

Section and length are chosen from the machine rather than from a voltage label: the centre length follows a measurement taken with the pack assembled, and the lug follows the terminal bolt size. A single lead, a matched set, or a full pack of links can be produced from the same specification.

Ordering a set

A rebuild usually needs more than one length, because the lead at the end of a pack is not the same as the links between cells. Ordering the set together keeps each lead matched to its position and avoids one long lead being cut down on site.

Support

Cables are selected from top-class manufacturers and inspected before dispatch, with online technical help during the order and after-market support afterwards. Where a pack uses more than one length, order the set together so each lead arrives matched to its position.

FAQ

Is this the perfect type construction?

Yes. LK-Cable-25 is the 25 model of the LK-Cable perfect type series, with customized centre length, rubber jacket and copper conductor. The whole series 25 / 35 / 50 / 70 is built to the same perfect type standard.

Is it suitable for different battery voltages?

Yes. The lead is a passive connection and the section is matched to the machine load, not to a voltage label.

What if my pack needs a larger section?

The same series continues in LK-Cable-35, 50 and 70, so the perfect type construction stays consistent across the pack.

Can I order a single lead?

Yes, single leads and pack sets are both produced.

Send your centre length, the model or section required and the terminal size to receive a quotation for the LK-Cable perfect type series.