|Model:||ESCH 24V/30A||Type:||High-frequency Automatic Battery Charger|
|Input Voltage:||100v-265v||Output Voltage:||24V|
|Application:||Stacker, Pallet Jacks, Pallet Walkies||Brand:||PROLAKER|
|Max Output Current:||30A||Max Output Power:||900w|
Economic Portable Intelligent Pallet Jacks Battery Charger ESCH 24V/30A CE Certification
|Type||Smart Battery Charger High frequency|
|Application||Electric pallet jacks, pallet walkies, cleaning sweeper|
|Battery parameter||24V 174-240Ah|
ESCH series automatic chargers for warehouse equipment and electric forklift provide a superior level of on-board and off-board reliability and charge quality. ESCH series chargers with UL and CE certification are tested to provide a long service life in difficult environments and provide charge quality for lead-acid or lithium-ion batteries.
|Machine category||Forklifts||Pallet walkies||Pallet jacks|
|Application description||heavy materials loaders and movers in warehouses, shipping depots, etc.||Light-duty material handling applications||Light-duty material handling applications in larger facilities. Larger battery pack capacity and lifting capability.|
|Battery pack voltage||24v/36v/48v/80v||12v/24v||24v|
|Battery pack capacity||200-800Ah||50-250Ah||225-800Ah|
Installation for the charger
1. Conditions for installation
The charger must be placed in a dry room with good ventilation. To keep all the venting holes on the charger clean for avoiding overheating. There is no corrosive and acidic gas near the charger to avoid corrosion for the charger.
The charger should place on the ground for operation.
2. Connection to the power supply
To connect to the power supply according to the requirements stipulated in the nameplate or operating instruction
Single-phase AC220V three cables (one for L, one for N; one for PE)
To connect the input cables of the charger to L, N, and PE of the power supply according to the marks. The connection to the power supply must be done by the electrical engineer according to the local standards. Otherwise, the case of the charger must be grounded.
3. Connection to the battery
Connecting the positive “+” and negative “-” of the battery with the positive “+” and negative “-” of the charger’s output respectively.
Contact Person: Molly