Heavy Duty Battery Charger For Forklift
Product Details
| Model: | CZB5C 80V/100A | Type: | Forklift Battery Charger |
|---|---|---|---|
| Output Voltage: | 80V | Output Current: | 100A |
| Application: | Electric Forklift | Brand: | LAKER |
| Certificates: | CE,ISO9001 | Phase: | Three Phases 380v |
| Battery Parameter: | 80v 580-800Ah | Size: | 526×360×882 Mm |
| Highlight |
fork truck battery charger,lorry battery charger |
||
Product Description
80V 100A Intelligent Electric Forklift Charger , Heavy Duty Battery Charger For Forklift
Model: CZB5C 80V/100A
Phase: Three Phases
Introduction:
CZB5C Series Intelligent Charger is the organic combination of leakage transformer, technology of Silicon-controlled rectifier and Microcomputer Control. This device could optimize Wsa+Pulse charging characteristic curve. As charge voltage of battery increases, charge current decreases automatically.
Pulse charge would be performed before gas emissions or in late stage of recharge. On the premise of guarantee adequate battery power, this device would lower greatly internal temperature and reduce gas emissions of battery, prolong the life of battery effectively and raise the charging efficiency eventually.
The whole product has simple structure, convenient operation, complete functions and high efficiency.
Application:
This device would be applicable to recharge of lead-acid batteries which could be used in
various electric vehicle such as power pallet trucks, fork-lift truck, lift truck, electronic tour bus.
Product Catalogs:
- Three-phase AC(3/PE) input power voltage.
| Specification | Input current A | Input power kVA |
Output current DC A |
Battery parameters | outline dimension mm |
Net weight kg |
|||
| @220V | @380V | @415V | V | Ah | |||||
| 8.5h-11h | |||||||||
| D48V/55A | 10.8 | 6.3 | 5.7 | 4.1 | 55 | 48 | 320-440 | 466×361×785 | 62 |
| D48V/65A | 12.8 | 7.4 | 6.8 | 4.9 | 65 | 48 | 375-520 | 466×361×785 | 65 |
| D48V/80A | 15.7 | 9.1 | 8.3 | 6.0 | 80 | 48 | 465-640 | 466×361×785 | 68 |
| D48V/100A | 19.7 | 11.4 | 10.4 | 7.5 | 100 | 48 | 580-800 | 526×360×882 | 86 |
| D48V/120A | 23.6 | 13.7 | 12.5 | 9.0 | 120 | 48 | 700-960 | 526×360×882 | 95 |
| D80V/65A | 21.3 | 12.3 | 11.3 | 8.1 | 65 | 80 | 375-520 | 526×360×882 | 87 |
| D80V/70A | 23.0 | 13.3 | 12.2 | 8.8 | 70 | 80 | 405-560 | 526×360×882 | 87 |
| D80V/80A | 26.2 | 15.2 | 13.9 | 10.0 | 80 | 80 | 465-640 | 526×360×882 | 89 |
| D80V/100A | 32.8 | 19.0 | 17.4 | 12.5 | 100 | 80 | 580-800 | 526×360×882 | 95 |
| D80V/120A | 39.4 | 22.8 | 20.9 | 15.0 | 120 | 80 | 700-960 | 526×360×882 | 107 |
While there are many battery chemistries today, and new types becoming commercially viable over time, we deal with the lead acid types, flooded, AGM, and true Gel, as they are widely used in the applications we specialize in. A typical lead acid battery cell has two plate types, one of lead and one of lead dioxide, both in contact with the sulfuric acid electrolyte as either a liquid, absorbed in a mat (AGM), or a gel. The lead dioxide (PbO2) plate reacts with the sulfuric acid (H2SO4) electrolyte resulting in hydrogen ions and oxygen ions (which make water) and lead sulfate (PbSO4) on the plate. The lead plate reacts with the electrolyte (sulfuric acid) and leaves lead sulfate (PbSO4), and a free electron. Discharge of the battery (allowing electrons to leave the battery) results in the build up of lead sulfate on the plates and water dilution of the acid. The specific gravity of the electrolyte as measured with a hydrometer in flooded batteries, indicates its relative charge (strength), or level of dilution (discharge). The reversibility of this reaction gives us the usefulness of a lead acid battery.
Charging the battery is reversing the process above, and involves subjecting the battery to voltages higher than its existing voltage. The higher the voltage, the faster the charge rate, subject to some limitations. There is a gassing point to consider, and true gel batteries have a lower peak charge voltage, because bubbles can occur in the gel which don't dissipate, and result in battery damage. The lead sulfate crystals are broken down (more or less successfully) in the charge cycle. Sometimes some crystals remain, or sometimes a battery is left partially discharged where the crystals of lead sulfate harden, and reduce the capacity of the battery to be charged. This is what desulfation (desulphation)is about.
Product Highlights
80V 100A Intelligent Electric Forklift Charger , Heavy Duty Battery Charger For Forklift Model: CZB5C 80V/100A Phase: Three Phases Introduction: CZB5C Series Intelligent Charger is the organic combination of leakage transformer, technology of Silicon-controlled rectifier and Microcomputer Control. ...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 24v 280Ah Cell Quantities 12 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
