Tubular Positive Plate EV Traction Battery 8V 140Ah For Cleaning Car / Tourism Boat
Product Details
| Type: | Golf Cart Battery | Model: | 8V 140Ah |
|---|---|---|---|
| Brand: | MYING | Nominal Voltage: | 8v |
| Nominal Capacity: | 140Ah | Plates: | Tubular Positive Plates |
| Application: | Electric Golf Cart | Certificates: | CE, TLC, ISO9001, ISO14001 |
| Highlight |
forklift truck batteries,forklift battery pack |
||
Product Description
8V140 is the 8V 140Ah pack for cleaning machines and small tourism boats. It uses the original footprint, carries roughly a tenth more capacity than the nameplate figure, and ships with cable and socket fitted so the truck is back on the floor within an hour of delivery.
Technical Specifications| Model | 8V 140Ah monobloc |
|---|---|
| Battery Type | Flooded lead acid traction battery |
| Nominal Voltage | 8 V |
| Rated Capacity | 140 Ah at the 5 hour rate |
| Plate Construction | Tubular positive plate |
| Cycle Life | 1500 deep cycles |
| Standard | IEC 60254 |
| Connection | Bolt terminal |
| Application | Cleaning machines, small electric boats |
- The high conductivity grid structure keeps current resistance low, so less energy is lost as heat during lifting.
- Tubular positive plates wrapped in glass fibre gauntlets resist the deep discharge pattern of counterbalance work.
- Cycle life is rated at 1500 deep cycles, which is roughly five to six years on one charge per day.
- The pack can be supplied dry charged or filled and formed, depending on the shipping route.
- Welded inter cell connectors hold their resistance far better than bolted links, which is where most older packs develop hot terminals.
- Cable cross section is 50 mm2, which keeps volt drop low over the length of the run.
| Primary fitment | Floor cleaning machines, tourism boats |
|---|---|
| Configuration | Single 8V monobloc, series connected for higher voltage |
| Terminal | Bolt terminal |
| Note | Automatic watering option available |
8V monobloc packs of this size are used where the machine runs on a low voltage motor and the battery has to fit a shallow tray.
- Container freight stations and customs bonded warehouses
- Airport cargo handling and ground support equipment
- Equipment rental fleets that need a standard pack across many trucks
- Retail distribution centres with narrow aisle racking
- Beverage bottling lines with wash down cleaning
- Heavy machinery assembly areas with overhead lifting
- Leave the charger connected after the cycle completes if it has a float stage, so the pack stays topped up.
- Keep a spare connector contact kit on site; it is the fastest fix for an intermittent fault.
- Inspect cable lugs and the socket every 500 operating hours for heat marks or looseness.
- Clean the bay floor before fitting a new pack, so grit does not wear through the case base.
- Check the battery retaining bar is tight after any pack change to stop movement on uneven floors.
- Fragile marks and this way up arrows are printed on each case.
- Timber bracing inside the container stops movement during ocean freight.
- Larger fleet orders are shipped in agreed weekly batches so installation can be scheduled.
- Standard production lead time is 15 to 25 working days after deposit.
- 37 checkpoints are signed off before a pack is released to packing.
- Warranty covers 12 months from delivery against defects in plates, container, seal and welds.
- Lid seal integrity is tested on a sample basis from every production lot.
- Plate thickness, grid weight and paste density are checked at incoming inspection.

Q1: How much does the pack weigh?
Weight depends on plate count and capacity. We quote the exact figure on the packing list, and it is available before shipment for floor loading calculations.
Q2: What is the minimum order and the delivery time?
One unit is acceptable for a trial. Standard production takes 15 to 25 working days after deposit, and mixed models can be consolidated in the same container.
Q3: Will this 8V140 fit my cleaning machines and small tourism boats without modification?
It is built for the bay used by the cleaning machines and small tourism boats. Send a photo of the old nameplate and the compartment with a tape measure across the width, and we will confirm terminal position, socket type and cable length before the order is released.
Q4: Is the pack supplied filled or dry?
Either. Filled and formed packs are ready to install; dry charged packs ship with electrolyte in a separate container and are activated on site.
Q5: Can the connector, cable length or container colour be changed?
Yes. The standard build is a grey container with a factory terminated socket; other connector types, cable lengths and colours are produced from your drawing or a sample of the original.
Product Highlights
8V140 is the 8V 140Ah pack for cleaning machines and small tourism boats. It uses the original footprint, carries roughly a tenth more capacity than the nameplate figure, and ships with cable and socket fitted so the truck is back on the floor within an hour of delivery.Technical SpecificationsModel...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.