Electric Forklift Battery Charger 30A One Year Warranty CE ISO9001 Certification

Electric Forklift Battery Charger 30A One Year Warranty CE ISO9001 Certification

Introduction:

CZC7 series automatic charger is an advanced Hi-Tech product with strong functions and smart shape. It is featured with small size, light weight, easy operated, high charging efficiency and high reliability ; It combines the high frequency technology with micro-processor controlling technology in one unit to reach the best charging result for the battery, effectively to prolong the battery set’s working cycle life, all the charging process is automatically executed according to the program without the operator on duty​.

Application:

​Ideal charging equipment for electric pallet truck, electric mover, electric lift, electric tour car and various of electric power driven vehicles.

Installation for the charger

1. Conditions for installation

The charger must be placed in a dry room with good ventilation. To keep all the venting holes on the charger clean for avoiding over heat. There is no corrosive and acidic gas near to the charger to avoid corrosion for the charger.

The charger should place on the ground for operation.

2. Connection to the power supply

To connect to the power supply according to the requirements stipulated in the nameplate or operating instruction

Single-phase AC220V three cables (one for L, one for N; one for PE)

To connect the input cables of charger to L, N and PE of the power supply according to the marks. The connection to the power supply must be done by the electrical engineer according to the local standards. Otherwise, the case of the charger must be grounded.

3. Connection to the battery

Connecting the positive “+” and negative “-”of the battery with the positive “+” and negative “-”of the charger’s output respectively.

Product Catalogs:

Product Features:

• Electric quantity controlling, timing controlling to ensure battery complete charging, auto-shut down after charging complete, no over-charging, no under-charging;
• High brightness LEDs indicating charger’s running state;
• Adopting IWUIa multi-stage charging style ( this charging style is applied for the general lead-acid battery charging);
• Adopting IWUUa multi-stage charging style ( this charging style is applied for the free maintenance lead-acid battery charging);
• Nixie tubes indicating battery voltage, charging current, capacity, time etc.;
• With auto-checking, time-delay start, soft-start functions;
• With the temperature compensation function for constant voltage point, floating charging point(CZC 7A adjustable charger is without this feature);
• With keeping charging function;
• Balanced charging to ensure the consistency of battery cell capacity;
• Automatic initial charging function;(Only the general lead-acid battery charging)
• With the protection of open circuit, over load, short circuit and over temperature ;
• With the function of information enquiring, to enquire past 20 times charging record;
• Memory during power interruption and self starting again;
• CZC7A adjustable charger can set charging voltage/current, multiple application for various specifications of battery.
•