High Capacity Low Discharge 48V 4PZS480 For Heli Forklift Traction Battery
Product Details
| Type: | Forklift Battery | Application: | Heli Forklift CPD18S-FQ2 |
|---|---|---|---|
| Voltage: | 48V | Capacity: | 480Ah |
| Battery Type: | Lead-Acid Battery | Number Of Monomers: | 24 |
| Iron Box Specification: | 1030*450*627mm | Material: | Lead,Alloy,PP, Steel |
| Highlight: | Wholesale Electric Forklift Battery, Heli CPD18S Electric Forklift Battery, 48V 480Ah Electric Forklift Battery | ||
| Highlight |
48V forklift traction battery,low discharge forklift battery,high capacity Heli battery |
||
Product Description
The 4PZS480 is a 48V 480Ah flooded traction battery sized for Heli 1.5 to 2 ton traction trucks. Its case follows the original mounting points in a case measuring 1030 x 450 x 627 mm, the inter cell connections are welded rather than bolted, and the socket is terminated before shipment so no site wiring is needed.
Technical Specifications| Model | 4PZS480 |
|---|---|
| Battery Type | Flooded lead acid traction battery, DIN pattern |
| Nominal Voltage | 48 V |
| Rated Capacity | 480 Ah at the 5 hour rate |
| Plate Group | 4 PzS tubular positive plates per cell |
| Cycle Life | 1500 deep cycles |
| Case Size | 1030 x 450 x 627 mm |
| Connection | Welded inter cell links |
| Application | Heli traction battery supply |
- Optional automatic watering and level indication can be fitted where operators should not open caps.
- Self discharge is around 5% per year, so a charged spare can sit on the rack for months and still start a shift.
- Soft link design reduces mechanical stress on the plates when the truck works on uneven floors.
- Perforated PVC sleeved separators slow dendritic growth and keep capacity stable over the cycle life.
- Plate thickness is selected for traction duty, giving more active material than a standby battery of the same footprint.
- Capacity runs about 10% above the nameplate figure, so lift speed stays steady instead of dropping in the final hour of a shift.
| Primary fitment | Heli 1.5 to 2 ton traction trucks |
|---|---|
| Case size | 1030 x 450 x 627 mm |
| Connector | Terminated to the original specification |
| Note | Low self discharge build for trucks that stand idle between shifts |
The 480Ah rating sits between the 400Ah and 550Ah packs, and is usually chosen when the bay cannot take a taller case.
- Manufacturing lines moving raw material and finished goods
- Steel and metal service centres moving coils and profiles
- Food and beverage plants where trucks work in chilled or ambient areas
- Cold store antechambers and freezer loading docks
- Chemical warehouses requiring acid resistant equipment
- Logistics hubs running mixed fleets across several buildings
- Use a calibrated hydrometer, and correct readings for temperature when comparing cells.
- Check electrolyte monthly and top up with distilled water after charging, never before.
- Replace a damaged connector housing rather than taping it; a poor contact becomes a fire risk.
- Equalise charge once a month when the truck works short or irregular shifts.
- Torque check the terminal bolts at the first service and after any cable replacement.
- Packing list, conformity certificate and warranty card travel with every shipment.
- Shipping documents include country of origin and HS code for customs clearance.
- Photographs of the packed goods are sent before the container leaves the factory.
- Timber bracing inside the container stops movement during ocean freight.
- Only new cells are used; no refurbished, relabelled or second hand material.
- Warranty covers 12 months from delivery against defects in plates, container, seal and welds.
- 37 checkpoints are signed off before a pack is released to packing.
- A conformity certificate to IEC 60254 is issued with each shipment on request.

Q1: Will this 4PZS480 fit my Heli 1.5 to 2 ton traction trucks without modification?
It is built for the bay used by the Heli 1.5 to 2 ton traction trucks in a case measuring 1030 x 450 x 627 mm. Send a photo of the old nameplate and the compartment with a tape measure across the width, and we will confirm terminal position, socket type and cable length before the order is released.
Q2: Do you supply spare cells and connectors?
Yes. Individual cells, connector kits, sockets and cable sets are available for the models we build, which lets you repair one cell instead of replacing a whole pack.
Q3: Can the connector, cable length or container colour be changed?
Yes. The standard build is a grey container with a factory terminated socket; other connector types, cable lengths and colours are produced from your drawing or a sample of the original.
Q4: How much does the pack weigh?
Weight depends on plate count and capacity. We quote the exact figure on the packing list, and it is available before shipment for floor loading calculations.
Q5: What is the minimum order and the delivery time?
One unit is acceptable for a trial. Standard production takes 15 to 25 working days after deposit, and mixed models can be consolidated in the same container.
Product Highlights
The 4PZS480 is a 48V 480Ah flooded traction battery sized for Heli 1.5 to 2 ton traction trucks. Its case follows the original mounting points in a case measuring 1030 x 450 x 627 mm, the inter cell connections are welded rather than bolted, and the socket is terminated before shipment so no site ...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.