48V 280Ah Heli Forklift Battery for High-Performance Charging
Product Details
| Battery Type: | Lead-acid Battery | Voltage: | 48 |
|---|---|---|---|
| Capacity (Ah): | 280 | Material: | Lead, Alloy, PP, Steel |
| Number Of Monomers: | 24 | ||
| Highlight |
48V 280Ah forklift battery,high-performance forklift battery,TCM forklift battery with warranty |
||
Product Description
The VSFL280 covers 48V 280Ah for Heli compact electric trucks with a 48V 280Ah requirement in a case measuring 652 x 482 x 574 mm. Every unit is leak tested, discharge tested and voltage checked before packing, and the inter cell links are welded, which removes the retightening step that older bolted packs needed.
Technical Specifications| Model | VSFL280 |
|---|---|
| Battery Type | Flooded lead acid traction battery |
| Nominal Voltage | 48 V |
| Rated Capacity | 280 Ah at the 5 hour rate |
| Cycle Life | 1500 deep cycles |
| Standard | IEC 60254 |
| Case Size | 652 x 482 x 574 mm |
| Connection | Welded inter cell links |
| Application | Compact electric truck traction supply |
- The socket is factory terminated and torque checked, which removes a common installation fault.
- Soft link design reduces mechanical stress on the plates when the truck works on uneven floors.
- Self discharge is around 5% per year, so a charged spare can sit on the rack for months and still start a shift.
- Plate thickness is selected for traction duty, giving more active material than a standby battery of the same footprint.
- The pack can be supplied dry charged or filled and formed, depending on the shipping route.
- Electrolyte volume is matched to the plate group, so the pack does not run dry between service intervals.
| Primary fitment | Heli compact 48V trucks |
|---|---|
| Case size | 652 x 482 x 574 mm |
| Connector | Terminated to the original specification |
| Note | Compact case for narrow battery compartments |
A 280Ah pack is the right size for trucks working short cycles in tight spaces, where a larger pack would waste space and weight.
- Beverage bottling lines with wash down cleaning
- Chemical warehouses requiring acid resistant equipment
- Heavy machinery assembly areas with overhead lifting
- Port and terminal operations with long travel distances per cycle
- Frozen food distribution with rapid temperature changes
- Timber and panel handling operations with long loads
- Verify charger output voltage annually against the pack specification.
- Wash the container with clean water if acid is spilled, then dry it fully before reconnecting.
- Keep the lid and vent caps clean; acid film on the cover is what starts terminal corrosion.
- Use a calibrated hydrometer, and correct readings for temperature when comparing cells.
- Keep a spare connector contact kit on site; it is the fastest fix for an intermittent fault.
- Photographs of the packed goods are sent before the container leaves the factory.
- Bulk orders are palletised, strapped and load planned so weight is distributed across the container floor.
- Cases carry model, voltage, capacity, net weight and handling marks on two faces.
- Standard production lead time is 15 to 25 working days after deposit.
- Serial numbers are recorded against the customer order for traceability.
- A conformity certificate to IEC 60254 is issued with each shipment on request.
- Plate thickness, grid weight and paste density are checked at incoming inspection.
- Cable crimp pull test is performed on each terminal before the socket is fitted.







Q1: Will this VSFL280 fit my Heli compact electric trucks with a 48V 280Ah requirement without modification?
It is built for the bay used by the Heli compact electric trucks with a 48V 280Ah requirement in a case measuring 652 x 482 x 574 mm. Send a photo of the old nameplate and the compartment with a tape measure across the width, and we will confirm terminal position, socket type and cable length before the order is released.
Q2: Can the connector, cable length or container colour be changed?
Yes. The standard build is a grey container with a factory terminated socket; other connector types, cable lengths and colours are produced from your drawing or a sample of the original.
Q3: Do you supply spare cells and connectors?
Yes. Individual cells, connector kits, sockets and cable sets are available for the models we build, which lets you repair one cell instead of replacing a whole pack.
Q4: What is the minimum order and the delivery time?
One unit is acceptable for a trial. Standard production takes 15 to 25 working days after deposit, and mixed models can be consolidated in the same container.
Q5: Can the pack be used in a cold store?
Yes, with the cold duty electrolyte option, which keeps capacity up at low temperature. Tell us the operating temperature range when ordering.
Product Highlights
The VSFL280 covers 48V 280Ah for Heli compact electric trucks with a 48V 280Ah requirement in a case measuring 652 x 482 x 574 mm. Every unit is leak tested, discharge tested and voltage checked before packing, and the inter cell links are welded, which removes the retightening step that older ...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.