VSDX565MH TCM FB25-7 Forklift Traction Battery for Smooth Motor Charging Experience
Product Details
| Voltage: | 48V | Capacity: | 565Ah |
|---|---|---|---|
| Application: | TCM FB25-7 | Battery Type: | Lead-acid Battery |
| Highlight |
VSDX565MH forklift traction battery,forklift battery smooth motor charging,traction battery with warranty |
||
Product Description
The VSDX565MH is a 48V 565Ah flooded traction battery sized for TCM FB25-7 2.5 ton electric trucks. Its case follows the original mounting points in a case measuring 1028 x 778 x 457 mm, the inter cell connections are welded rather than bolted, and the socket is terminated before shipment so no site wiring is needed.
Technical Specifications| Model | VSDX565MH |
|---|---|
| Battery Type | Flooded lead acid traction battery |
| Nominal Voltage | 48 V |
| Rated Capacity | 565 Ah at the 5 hour rate |
| Cycle Life | 1500 deep cycles |
| Standard | IEC 60254 |
| Case Size | 1028 x 778 x 457 mm |
| Connection | Welded inter cell links |
| Application | TCM FB25-7 traction supply |
- The socket is factory terminated and torque checked, which removes a common installation fault.
- The lid seal is tested at 20 kPa, so acid mist does not escape onto the truck frame.
- Welded inter cell connectors hold their resistance far better than bolted links, which is where most older packs develop hot terminals.
- Tubular positive plates wrapped in glass fibre gauntlets resist the deep discharge pattern of counterbalance work.
- Cycle life is rated at 1500 deep cycles, which is roughly five to six years on one charge per day.
- Capacity runs about 10% above the nameplate figure, so lift speed stays steady instead of dropping in the final hour of a shift.
| Primary fitment | TCM FB25-7 |
|---|---|
| Case size | 1028 x 778 x 457 mm |
| Connector | Terminated to the original specification |
| Note | Shallow wide case matched to the FB25-7 bay |
The FB25-7 uses a shallow, wide battery bay, which is why this pack is built on a 1028 x 778 x 457 mm case rather than a tall DIN box.
- Chemical warehouses requiring acid resistant equipment
- Equipment rental fleets that need a standard pack across many trucks
- Tyre and rubber plants with continuous three shift operation
- Cross dock facilities where trucks charge in short windows
- Frozen food distribution with rapid temperature changes
- Pharmaceutical warehouses with strict cleaning routines
- Never stack tools or metal parts on the battery lid; a short across the terminals destroys the pack instantly.
- Replace a damaged connector housing rather than taping it; a poor contact becomes a fire risk.
- Store spare packs in a ventilated area between 10 and 30 degrees C and boost them every three months.
- Check the battery retaining bar is tight after any pack change to stop movement on uneven floors.
- Keep a spare connector contact kit on site; it is the fastest fix for an intermittent fault.
- Timber bracing inside the container stops movement during ocean freight.
- Cases carry model, voltage, capacity, net weight and handling marks on two faces.
- Standard production lead time is 15 to 25 working days after deposit.
- Mixed models can be consolidated in one container, with each case labelled by truck model.
- CE documentation is available for EU destinations.
- 37 checkpoints are signed off before a pack is released to packing.
- A conformity certificate to IEC 60254 is issued with each shipment on request.
- Lid seal integrity is tested on a sample basis from every production lot.



Q1: What is the minimum order and the delivery time?
One unit is acceptable for a trial. Standard production takes 15 to 25 working days after deposit, and mixed models can be consolidated in the same container.
Q2: Do I need a special charger?
Any charger with a flooded lead acid profile matching 48V and the correct plug will work. If your charger is set for a different technology, send the model and we will tell you whether the profile needs changing.
Q3: Can the connector, cable length or container colour be changed?
Yes. The standard build is a grey container with a factory terminated socket; other connector types, cable lengths and colours are produced from your drawing or a sample of the original.
Q4: Can the pack be used in a cold store?
Yes, with the cold duty electrolyte option, which keeps capacity up at low temperature. Tell us the operating temperature range when ordering.
Q5: Will this VSDX565MH fit my TCM FB25-7 2.5 ton electric trucks without modification?
It is built for the bay used by the TCM FB25-7 2.5 ton electric trucks in a case measuring 1028 x 778 x 457 mm. Send a photo of the old nameplate and the compartment with a tape measure across the width, and we will confirm terminal position, socket type and cable length before the order is released.
Product Highlights
The VSDX565MH is a 48V 565Ah flooded traction battery sized for TCM FB25-7 2.5 ton electric trucks. Its case follows the original mounting points in a case measuring 1028 x 778 x 457 mm, the inter cell connections are welded rather than bolted, and the socket is terminated before shipment so no site ...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.