48V 720Ah High Capacity DIN Standard Forklift Traction Battery 1500 Times Cycle Life 8PZS720
Product Details
| Battery Type: | Lead-acid Battery | Application: | Charging The Motor |
|---|---|---|---|
| Number Of Monomers (only): | 24 | Voltage: | 48 |
| Highlight |
industrial forklift lead-acid battery,long-lasting forklift traction battery,factory price forklift battery |
||
Product Description
The 8PZS720 covers 48V 720Ah for 2.5 to 3 ton DIN standard electric counterbalance trucks. Every unit is leak tested, discharge tested and voltage checked before packing, and the inter cell links are welded, which removes the retightening step that older bolted packs needed.
Technical Specifications| Model | 8PZS720 |
|---|---|
| Battery Type | Flooded lead acid traction battery, DIN pattern |
| Nominal Voltage | 48 V |
| Rated Capacity | 720 Ah at the 5 hour rate |
| Plate Group | 8 PzS tubular positive plates per cell |
| Cycle Life | 1500 deep cycles |
| Standard | IEC 60254 |
| Connection | Welded inter cell links |
| Container | Polypropylene with acid resistant finish |
| Application | Heavy duty electric counterbalance trucks |
- Optional automatic watering and level indication can be fitted where operators should not open caps.
- Cables are cut to the original lengths, positive and negative, so the truck harness reaches without strain.
- The case geometry follows the truck bay, so the pack drops onto the existing rollers without spacers, shims or new retaining bars.
- Cycle life is rated at 1500 deep cycles, which is roughly five to six years on one charge per day.
- Handling points are moulded into the case, so the pack can be lifted with the correct sling rather than a fork through the lid.
- The pack can be supplied dry charged or filled and formed, depending on the shipping route.
| Primary fitment | 2.5 to 3 ton DIN standard counterbalance trucks |
|---|---|
| Battery class | 8PZS720, 48V 720Ah DIN pattern |
| Related | Heli, Hangcha and other DIN pattern trucks in this class |
A 48V 720Ah pack of this size is normally chosen for trucks working heavy loads or long travel distances, where a smaller pack would need a mid shift charge.
- Cold store antechambers and freezer loading docks
- Heavy machinery assembly areas with overhead lifting
- Steel and metal service centres moving coils and profiles
- Food and beverage plants where trucks work in chilled or ambient areas
- Chemical warehouses requiring acid resistant equipment
- Recycling and waste transfer stations
- Clean the bay floor before fitting a new pack, so grit does not wear through the case base.
- Inspect cable lugs and the socket every 500 operating hours for heat marks or looseness.
- Record specific gravity quarterly; one low cell reading is the earliest warning of a failing unit.
- Check electrolyte monthly and top up with distilled water after charging, never before.
- Keep the bay drainage clear so spilled electrolyte cannot collect under the case.
- Timber bracing inside the container stops movement during ocean freight.
- Photographs of the packed goods are sent before the container leaves the factory.
- Case dimensions are quoted on the packing list so the receiving site can plan forklift access.
- Fragile marks and this way up arrows are printed on each case.
- Dimensional check against the bay drawing is done on each unit for this model.
- Plate thickness, grid weight and paste density are checked at incoming inspection.
- Every finished pack passes leak test, polarity check and open circuit voltage measurement.
- CE documentation is available for EU destinations.





Q1: Can the connector, cable length or container colour be changed?
Yes. The standard build is a grey container with a factory terminated socket; other connector types, cable lengths and colours are produced from your drawing or a sample of the original.
Q2: Is the pack supplied filled or dry?
Either. Filled and formed packs are ready to install; dry charged packs ship with electrolyte in a separate container and are activated on site.
Q3: Will this 8PZS720 fit my Heli 2.5 to 3 ton DIN standard electric counterbalance trucks without modification?
It is built for the bay used by the 2.5 to 3 ton DIN standard electric counterbalance trucks. Send a photo of the old nameplate and the compartment with a tape measure across the width, and we will confirm terminal position, socket type and cable length before the order is released.
Q4: What is the minimum order and the delivery time?
One unit is acceptable for a trial. Standard production takes 15 to 25 working days after deposit, and mixed models can be consolidated in the same container.
Q5: Can you match the capacity of a pack that is no longer available?
Yes. Send the original model code, voltage, capacity and bay dimensions. We can build to the original rating or adjust it slightly to fit the available space.
Product Highlights
The 8PZS720 covers 48V 720Ah for 2.5 to 3 ton DIN standard electric counterbalance trucks. Every unit is leak tested, discharge tested and voltage checked before packing, and the inter cell links are welded, which removes the retightening step that older bolted packs needed.Technical SpecificationsM...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.