80V 120A Forklift Battery Charger CZB5C-D Three Phase SCR Charger for 700-960Ah Battery Packs
Product Details
| Size: | 526×360×882 Mm | Tybe: | Forklift Lithium Ion Battery Chargers |
|---|---|---|---|
| Place Of Origin: | Zhejiang,China | Use: | Forklift Charger |
| Output Current: | 100A | Output Voltage: | 48V |
| Model: | CZB5C-D80V/120A | Type: | Forklift Battery Charger |
| Output Voltage: | 80V DC (40 X 2V Cells) | Output Current: | 120A Maximum |
| Battery Capacity: | 700-960Ah (8.5h Rate) | Input Voltage: | 3-phase 380V AC (220V/415V Input Currents Published) |
| Input Power: | 15.0 KVA | Dimensions: | 526 X 360 X 882 Mm |
| Net Weight: | 107 Kg | Technology: | SCR Phase-angle Control, Line-frequency Transformer |
| Charge Characteristic: | Wa Taper With Timed Equalising Finish | Cooling: | Thermostatic Forced Air |
| Protection: | Open Circuit, Reverse Connection, Overload, Short Circuit, Over-temperature | Warranty: | 12 Months |
| Application: | 80V Fleets With 700-960Ah Lead Acid Traction Packs, Including Large Counterbalance Trucks, Container Handlers And Shared Battery Rooms In Ports And Heavy Manufacturing. | ||
| Highlight |
80V 120A Forklift Charger,CZB5C-D Three Phase Charger,700-960Ah Battery Charger |
||
Product Description
Quick answer: CZB5C-D80V/120A delivers 120A at 80V for 700-960Ah traction packs in ports, container handlers and heavy manufacturing. 15 kVA three-phase input, Wa taper charge with timed equalising finish, 526 x 360 x 882 mm, 107 kg, CE and ISO9001, 15 days delivery.
At 120A the charger stops being a box on the wall and becomes part of the plant. The CZB5C-D80V/120A is the largest model in the CZB5C 80V range: 15kVA of transformer, a 40-cell DC output, and enough current to bring a 700-960Ah traction pack back inside an eight-hour turnaround. It is specified for battery rooms where the packs are shared between trucks and the charge window is fixed by the shift pattern, not by the charger.
SCR stands for Silicon Controlled Rectifier, a four-layer PNPN thyristor. It blocks current in both directions until a gate pulse lets it conduct, and then it stays latched until the current falls to zero at the end of a half cycle. In a charger it does the job a dimmer does for a lamp, except that it is switching 120A and it has a mains transformer in front of it.
The sequence inside the cabinet is short enough to describe in one sentence: three-phase mains enters a 50Hz transformer that steps the voltage down to the level the pack needs, a thyristor bridge rectifies and regulates it, and a closed-loop controller trims the firing angle so the output current holds at the set value while the pack voltage climbs. There is no high-frequency switching stage and no firmware-defined charge profile to go out of date.
Two consequences follow. The current limit is set by copper and silicon rather than by software, so a stalled fan or a shorted connector is absorbed by the hardware instead of being computed. And every power part is a catalogue item - thyristor, fuse, contactor, fan, relay - which is why a CZB5C built years ago is still repairable in a workshop that has never seen a wiring diagram.
- It survives the supply. Panel plants, ports and foundries have voltage dips and phase imbalance. A transformer front end rides through them; a switching supply protects itself and stops.
- It is repaired in-house. Thyristors, contactors, fuses, fans and control relays are off-the-shelf parts. No proprietary board, no factory return, no three-week air freight.
- It is forgiving of heat. There is no dense electronics stack sitting above the heat source. The transformer is the heat source, and it is designed to run hot.
- It can be re-tapped. A different pack voltage or capacity is a tap change and a setting, not a new charger.
- It gives decades of service. Winding insulation and a fan motor are the wear items, and both are replaceable on site.
- The trade-off is honest. More weight, more footprint, and a few points less efficiency than a high-frequency design. For a battery room that runs every day, that is a fair exchange.
| Parameter | Value |
|---|---|
| Model | CZB5C-D80V/120A |
| Charging technology | SCR phase-angle control, line-frequency transformer |
| Input voltage | 3-phase 380V AC (220V / 415V input currents published) |
| Input current @220V / @380V / @415V | 39.4 / 22.8 / 20.9 A |
| Input power | 15.0 kVA |
| Output voltage | 80V DC (40 x 2V cells) |
| Output current | 120A maximum |
| Battery capacity | 700-960Ah at the 8.5h discharge rate |
| Charge characteristic | Wa taper with timed equalising finish |
| Dimensions | 526 x 360 x 882 mm |
| Net weight | 107 kg |
| Cooling | Thermostatic forced air |
| Protection | Open circuit, reverse connection, overload, short circuit, over-temperature |
| Warranty | 12 months |
An 850Ah pack at 20% depth has about 680Ah to replace. At 120A the bulk stage is roughly five and a half hours; the taper and equalising finish take it to the eight-hour window. On the 700Ah pack the rate is 0.17C, and on the 960Ah pack it is 0.125C. Those are the same C-rate band as every other model in the family, which is the point: the CZB5C range is built so that a fleet can standardise on one charge profile and scale the current with the pack.
Large packs are not just bigger versions of small ones. A 960Ah 80V battery has a different thermal mass, a different gassing behaviour at the end of charge, and a connector that has to carry 120A for hours without heating. The CZB5C-D80V/120A is built around those facts: a transformer rated for continuous duty, a thyristor bridge with the margin to regulate at full current, and a charge curve that tapers on the Wa characteristic rather than cutting off hard.
- The truck is brought to the bay, the key switch is turned off and the battery connector is made. Reverse connection is detected before the contactor closes.
- The unit runs its automatic battery detection, applies the delayed start, then soft-starts into the pack. Nothing slams the plates with full current at t=0.
- Current holds at the set value while voltage climbs through the gassing level. The double closed loop tracks voltage and current together and corrects the firing angle continuously.
- Current tapers along the Wa curve, the standard taper characteristic: current falls as the pack comes up, finishing at a low float-level current rather than a hard cut.
- The equalising stage holds the finish for its set period, bringing the cells back to a common specific gravity before the charger shuts down.
- The finish data is written to memory, one of the last 30 recharges a technician can read back when a pack starts to underperform.
The same cabinet family covers 48V and 80V packs, from 55A to 120A. If this model is not the exact fit, the table shows the alternatives on the same transformer platform.
| Model | Power (kVA) | Input current 220/380/415V (A) | Output current (A) | Battery V | Battery Ah (8.5h) | Dimensions (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| D48V/55A | 4.1 | 10.8 / 6.3 / 5.7 | 55 | 48 | 320-440 | 466x361x785 | 62 |
| D48V/65A | 4.9 | 12.8 / 7.4 / 6.8 | 65 | 48 | 375-520 | 466x361x785 | 65 |
| D48V/80A | 6.0 | 15.7 / 9.1 / 8.3 | 80 | 48 | 465-640 | 466x361x785 | 68 |
| D48V/100A | 7.5 | 19.7 / 11.4 / 10.4 | 100 | 48 | 580-800 | 526x360x882 | 86 |
| D48V/120A | 9.0 | 23.6 / 13.7 / 12.5 | 120 | 48 | 700-960 | 526x360x882 | 95 |
| D80V/65A | 8.1 | 21.3 / 12.3 / 11.3 | 65 | 80 | 375-520 | 526x360x882 | 87 |
| D80V/70A | 8.8 | 23.0 / 13.3 / 12.2 | 70 | 80 | 405-560 | 526x360x882 | 87 |
| D80V/80A | 10.0 | 26.2 / 15.2 / 13.9 | 80 | 80 | 465-640 | 526x360x882 | 89 |
| D80V/100A | 12.5 | 32.8 / 19.0 / 17.4 | 100 | 80 | 580-800 | 526x360x882 | 95 |
| D80V/120A | 15.0 | 39.4 / 22.8 / 20.9 | 120 | 80 | 700-960 | 526x360x882 | 107 |
Battery capacity is quoted at the 8.5h discharge rate. Special specifications are tailor designed on request: connector type, cable length, input voltage and paint colour can all be set at order.
- Supply. A dedicated three-phase feed with an isolation and protection device rated for the input current in the table above.
- Cable. Keep the DC run to the truck short and correctly sized. 120A through an undersized cable turns into heat, voltage drop and a slow charge.
- Air. Free air on the fan side of the cabinet, and ventilation for the pack itself. Charging a flooded pack in a sealed room is a hydrogen problem, not a charger problem.
- Position. Floor-standing, level, away from direct water spray. Castors are available where the bay is shared between trucks.
- Connector. Tell us the plug you standardise on. DIN 160A, Anderson and fixed bolt terminations are all supplied to order.
- Weekly: confirm the fan runs and the intake is not blanketed in dust. Overheat faults in hot bays are almost always airflow, not electronics.
- Monthly: check the finish voltage against the pack specification and read back the last recharges from memory.
- Per pack service: run the equalising charge as scheduled, and use the desulphation function on packs that have been left standing.
- Spares to hold: thyristors, fuses, a fan and a contactor. That is the whole wear list, and it fits in a shoebox.
Silicon Controlled Rectifier, a thyristor. The charger steps the mains down through a transformer and regulates with a phase-controlled thyristor bridge. It is the classic heavy-duty charger topology, and it is still the most repairable one.
No. The CZB5C is a lead-acid Wa taper charger. Lithium packs need a CC/CV profile with cell balancing communication; for those we supply the CZC7 and ESCH lithium series. Using the wrong topology on a lithium pack is a safety issue, not a warranty issue.
Three-phase 220V, 380V and 415V are the standard options, with the input current for each published in the table. Single-phase input is available on the smaller E-series models, not on this cabinet.
15 days after order confirmation and deposit, with a supply capacity of 5000 pieces per month across the range.
The charger is packed in a plywood case with a moisture barrier, fumigation free, and can be shipped EXW, FOB or CIF. To quote accurately, send four lines: pack voltage and cell count, capacity in Ah, the number of trucks charged per shift, and the connector type you use.
Application: 80V fleets with 700-960Ah lead acid traction packs, including large counterbalance trucks, container handlers and shared battery rooms in ports and heavy manufacturing.
Introduction
The lithium-ion battery generator for forklifts is specifically designed to accommodate the charging requirements of a wide range of battery types. It is suitable for both standard and maintenance charging applications for electric vehicles, such as forklifts, electric pallet trucks, stackers, and sightseeing vehicles. By incorporating an optimized Wa curve, advanced microprocessor control technology, and intelligent dynamic charging capabilities, the generator ensures thorough charge penetration into the battery plates, achieving a complete charge while maintaining a micro-bubble state throughout the charging process. This innovative methodology significantly reduces electrolyte evaporation, enhances charging efficiency, and prolongs battery service life. Featuring comprehensive functionality, a sophisticated and modern design, an intuitive user interface, high power factor, energy-efficient performance, and a diverse selection of models (including both desktop and vertical cube configurations), this product represents an optimal solution for a broad spectrum of customer requirements.

Company strength
1. All forklift related products and spare parts are originally manufactured by domestic first - class manufacturers , and inspected by professional and technical personnel .
2. Provide customers with online technical advice or after - sales solutions at any time .
3. Our commitment to service , knowledge and product availability makes us a one - stop shop for our customers ' business needs .
About us
LAKER AUTO PARTS CO., LIMITED is ONE-STOP-SHOP offering parts and accessories for forklifts trucks, low-speed electric vehicles,manual tray loaders, automated tray packaging machines, portable dump trucks, mobile food tray trucks, portable toilet trailers, electric stackers and auxiliary material handling equipment guarantee high-performance products at the most competitive price.Our core products are as follows:
1. Lead acid Batteries for Electric forklift trucks and Electric vehicles,
2. Intelligent automatic battery chargers including industrial frequency and high frequency,
3. Regular black and non-marking solid tires for forklifts used at small working fields and warehouses,
4. Hydraulic solid tire press machine for mounting and dismounting the solid tires,
5. Mobile loading ramp and fixed dock leveler for loading the container and goods,
6. Low-speed Electric vehicle with loading platform 1Ton to 3Ton for warehouse/airport/port dock material delivery.
and various of battery accessories for application of maintenance and replacement. (Such as battery plates, gauntlets, connectors, battery watering systems, battery safety valves, battery vent plugs, battery cables and etc.)
7. Many different kinds of golf cart and sightseeing vehicles
8. A range of work vehicles that can conveniently pack and carry objects (Hand Palle Truck,Automatic Pallet Truck,CRAWLER Dumper Truck) and Electric Stackers that can operate within limited space
9. Mobile Toilet Trailer involved in everyday life
10. Mobile Food Trailer in operation

FAQ
1.Do you provide free of sample?
Sample depends on the Model No., material and quantity. We provide free of sample with freight collect,
but some of samples need client to pay the cost.
2. How about your MOQ?
For standard parts .MOQ is 1 pcs, for customized ,MOQ depends the details.
3. Do you offer customization service?
Yes ,We can printing your brand (logo, artwork)on the products or laser engraving your brand. We can custom your
packaging according to your design.AII copyright own by clients and we promised don't disclose any info.
4. how about the delivery time?
Most orders will be shipped within 3-10 days after payment being received.
5. What are the advantages of your company?
One-stop solution for forklift parts, excellent manufacturer auditing and integration system, reasonable price and
quality assurance.
6. Which payment method does your company
support?
T/T and L/C are preferred. we will do our best to meet your needs, negotiable.
Product Highlights
CZB5C-D80V/120A delivers 120A at 80V for 700-960Ah traction packs in ports, container handlers and heavy manufacturing. 15 kVA three-phase input, Wa taper charge with timed equalising finish, 526 x 360 x 882 mm, 107 kg, CE and ISO9001, 15 days delivery.
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.