48V 55A Forklift Battery Charger CZB5C-D SCR Transformer Charger for 320-440Ah Traction Packs
Product Details
| Output Voltage: | 48V | Principle: | Rectifier |
|---|---|---|---|
| Model: | CZB5C-D48V/55A | Output Voltage: | 48V DC (24 X 2V Cells) |
| Output Current: | 55A Maximum | Battery Capacity: | 320-440Ah (8.5h Rate) |
| Input Voltage: | 3-phase 380V AC (220V/415V Input Currents Published) | Input Power: | 4.1 KVA |
| Dimensions: | 466 X 361 X 785 Mm | Net Weight: | 62 Kg |
| Technology: | SCR Phase-angle Control, Line-frequency Transformer | Charge Characteristic: | Wa Taper With Timed Equalising Finish |
| Cooling: | Thermostatic Forced Air | Protection: | Open Circuit, Reverse Connection, Overload, Short Circuit, Over-temperature |
| Warranty: | 12 Months | Application: | Three-wheel And Compact Four-wheel Electric Counterbalance Trucks, Pallet Trucks And Tow Tractors Running 48V 320-440Ah Lead Acid Packs In Single-shift Warehouses, Workshops And Small Distribution Centres. |
| Battery Parameter: | 48V 320-440Ah | Size: | 466×361×785 Mm |
| Type: | Forklift Battery Charger | ||
| Highlight |
48V 55A SCR Forklift Charger,CZB5C-D Transformer Charger,320-440Ah Traction Battery Charger |
||
Product Description
Quick answer: CZB5C-D48V/55A is a three-phase SCR charger delivering 55A for 48V 320-440Ah lead-acid packs on three- and four-wheel counterbalance trucks, pallet trucks and tow tractors. 4.1 kVA input, 466 x 361 x 785 mm, 62 kg, CE and ISO9001, 15 days delivery.
The 48V 55A slot is the quiet workhorse of a warehouse battery room: three-wheel and compact four-wheel counterbalance trucks on 320-440Ah packs, one shift, back on charge at lunchtime. The CZB5C-D48V/55A is built for exactly that duty. It is a line-frequency SCR charger, transformer-fed and thyristor-controlled, with a 55A output that sits at a comfortable 0.14C on a 400Ah pack. Nothing in it is exotic, and nothing in it is proprietary.
SCR stands for Silicon Controlled Rectifier, a four-layer PNPN thyristor. It blocks current in both directions until a gate pulse lets it conduct, and then it stays latched until the current falls to zero at the end of a half cycle. In a charger it does the job a dimmer does for a lamp, except that it is switching 55A and it has a mains transformer in front of it.
The sequence inside the cabinet is short enough to describe in one sentence: three-phase mains enters a 50Hz transformer that steps the voltage down to the level the pack needs, a thyristor bridge rectifies and regulates it, and a closed-loop controller trims the firing angle so the output current holds at the set value while the pack voltage climbs. There is no high-frequency switching stage and no firmware-defined charge profile to go out of date.
Two consequences follow. The current limit is set by copper and silicon rather than by software, so a stalled fan or a shorted connector is absorbed by the hardware instead of being computed. And every power part is a catalogue item - thyristor, fuse, contactor, fan, relay - which is why a CZB5C built years ago is still repairable in a workshop that has never seen a wiring diagram.
- It survives the supply. Panel plants, ports and foundries have voltage dips and phase imbalance. A transformer front end rides through them; a switching supply protects itself and stops.
- It is repaired in-house. Thyristors, contactors, fuses, fans and control relays are off-the-shelf parts. No proprietary board, no factory return, no three-week air freight.
- It is forgiving of heat. There is no dense electronics stack sitting above the heat source. The transformer is the heat source, and it is designed to run hot.
- It can be re-tapped. A different pack voltage or capacity is a tap change and a setting, not a new charger.
- It gives decades of service. Winding insulation and a fan motor are the wear items, and both are replaceable on site.
- The trade-off is honest. More weight, more footprint, and a few points less efficiency than a high-frequency design. For a battery room that runs every day, that is a fair exchange.
| Parameter | Value |
|---|---|
| Model | CZB5C-D48V/55A |
| Charging technology | SCR phase-angle control, line-frequency transformer |
| Input voltage | 3-phase 380V AC (220V / 415V input currents published) |
| Input current @220V / @380V / @415V | 10.8 / 6.3 / 5.7 A |
| Input power | 4.1 kVA |
| Output voltage | 48V DC (24 x 2V cells) |
| Output current | 55A maximum |
| Battery capacity | 320-440Ah at the 8.5h discharge rate |
| Charge characteristic | Wa taper with timed equalising finish |
| Dimensions | 466 x 361 x 785 mm |
| Net weight | 62 kg |
| Cooling | Thermostatic forced air |
| Protection | Open circuit, reverse connection, overload, short circuit, over-temperature |
| Warranty | 12 months |
Take a 400Ah pack at 20% state of charge. Roughly 320Ah has to go back in. At 55A the bulk stage takes about 5.8 hours; the Wa taper and the equalising finish add two to three hours, which is why the 8.5-hour shift change works. The same arithmetic on a 320Ah pack gives 0.17C - still inside the range a flooded traction battery will accept, and the charger simply finishes earlier. On a 440Ah pack the rate drops to 0.125C, which is gentle enough for a pack that is expected to last eight years.
A 55A charger is not a compromise. It is the correct size for a 24-cell pack in the 320-440Ah band, where the battery is discharged to roughly 20% and must be ready for the next shift. Push more current and the pack heats for no gain; push less and the truck waits. The CZB5C-D48V/55A lands in the band the battery makers specify, and it holds that current as the pack voltage climbs from 44V to the gassing point.
- The truck is brought to the bay, the key switch is turned off and the battery connector is made. Reverse connection is detected before the contactor closes.
- The unit runs its automatic battery detection, applies the delayed start, then soft-starts into the pack. Nothing slams the plates with full current at t=0.
- Current holds at the set value while voltage climbs through the gassing level. The double closed loop tracks voltage and current together and corrects the firing angle continuously.
- Current tapers along the Wa curve, the standard taper characteristic: current falls as the pack comes up, finishing at a low float-level current rather than a hard cut.
- The equalising stage holds the finish for its set period, bringing the cells back to a common specific gravity before the charger shuts down.
- The finish data is written to memory, one of the last 30 recharges a technician can read back when a pack starts to underperform.
The same cabinet family covers 48V and 80V packs, from 55A to 120A. If this model is not the exact fit, the table shows the alternatives on the same transformer platform.
| Model | Power (kVA) | Input current 220/380/415V (A) | Output current (A) | Battery V | Battery Ah (8.5h) | Dimensions (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| D48V/55A | 4.1 | 10.8 / 6.3 / 5.7 | 55 | 48 | 320-440 | 466x361x785 | 62 |
| D48V/65A | 4.9 | 12.8 / 7.4 / 6.8 | 65 | 48 | 375-520 | 466x361x785 | 65 |
| D48V/80A | 6.0 | 15.7 / 9.1 / 8.3 | 80 | 48 | 465-640 | 466x361x785 | 68 |
| D48V/100A | 7.5 | 19.7 / 11.4 / 10.4 | 100 | 48 | 580-800 | 526x360x882 | 86 |
| D48V/120A | 9.0 | 23.6 / 13.7 / 12.5 | 120 | 48 | 700-960 | 526x360x882 | 95 |
| D80V/65A | 8.1 | 21.3 / 12.3 / 11.3 | 65 | 80 | 375-520 | 526x360x882 | 87 |
| D80V/70A | 8.8 | 23.0 / 13.3 / 12.2 | 70 | 80 | 405-560 | 526x360x882 | 87 |
| D80V/80A | 10.0 | 26.2 / 15.2 / 13.9 | 80 | 80 | 465-640 | 526x360x882 | 89 |
| D80V/100A | 12.5 | 32.8 / 19.0 / 17.4 | 100 | 80 | 580-800 | 526x360x882 | 95 |
| D80V/120A | 15.0 | 39.4 / 22.8 / 20.9 | 120 | 80 | 700-960 | 526x360x882 | 107 |
Battery capacity is quoted at the 8.5h discharge rate. Special specifications are tailor designed on request: connector type, cable length, input voltage and paint colour can all be set at order.
- Supply. A dedicated three-phase feed with an isolation and protection device rated for the input current in the table above.
- Cable. Keep the DC run to the truck short and correctly sized. 55A through an undersized cable turns into heat, voltage drop and a slow charge.
- Air. Free air on the fan side of the cabinet, and ventilation for the pack itself. Charging a flooded pack in a sealed room is a hydrogen problem, not a charger problem.
- Position. Floor-standing, level, away from direct water spray. Castors are available where the bay is shared between trucks.
- Connector. Tell us the plug you standardise on. DIN 160A, Anderson and fixed bolt terminations are all supplied to order.
- Weekly: confirm the fan runs and the intake is not blanketed in dust. Overheat faults in hot bays are almost always airflow, not electronics.
- Monthly: check the finish voltage against the pack specification and read back the last recharges from memory.
- Per pack service: run the equalising charge as scheduled, and use the desulphation function on packs that have been left standing.
- Spares to hold: thyristors, fuses, a fan and a contactor. That is the whole wear list, and it fits in a shoebox.
Silicon Controlled Rectifier, a thyristor. The charger steps the mains down through a transformer and regulates with a phase-controlled thyristor bridge. It is the classic heavy-duty charger topology, and it is still the most repairable one.
No. The CZB5C is a lead-acid Wa taper charger. Lithium packs need a CC/CV profile with cell balancing communication; for those we supply the CZC7 and ESCH lithium series. Using the wrong topology on a lithium pack is a safety issue, not a warranty issue.
Three-phase 220V, 380V and 415V are the standard options, with the input current for each published in the table. Single-phase input is available on the smaller E-series models, not on this cabinet.
15 days after order confirmation and deposit, with a supply capacity of 5000 pieces per month across the range.
The charger is packed in a plywood case with a moisture barrier, fumigation free, and can be shipped EXW, FOB or CIF. To quote accurately, send four lines: pack voltage and cell count, capacity in Ah, the number of trucks charged per shift, and the connector type you use.
Application: Three-wheel and compact four-wheel electric counterbalance trucks, pallet trucks and tow tractors running 48V 320-440Ah lead acid packs in single-shift warehouses, workshops and small distribution centres.
-
Features
CZB5C Series Intelligent Charger is the organic combination of leakage transformer, technology of Silicon-controlled rectifier and Microcomputer Control. This device could optimize Wsa+Pulse charging characteristic curve. As charge voltage of battery increases, charge current decreases automatically. Pulse charge would be performed before gas emissions or in late stage of recharge. On the premise of guarantee adequate battery power, this device would lower greatly internal temperature and reduce gas emissions of battery, prolong the life of battery effectively and raise the charging efficiency eventually.
The whole product has simple structure, convenient operation, complete functions and high efficiency.

-
Operating conditions
(1)No higher than 2000 meters in altitude.
(2)Ambient temperature between 10 and 40 degrees C.
(3)Relative humidity not exceed 85% for conditions of ambient temperature around 20℃ ±5℃.
(4)Store in a place free from conductive dust & the risk of explosion.
(5)Do not store in harmful atmosphere such as corrosive gas, insulating gas, steam.
(6)Store in a place free from rain & snow.
(7)Deviation from vertical shall be less than 5 degrees. Working situation without violent vibration and striking.

-
Technical data


LAKER AUTO PARTS CO., LIMITED is ONE-STOP-SHOP offering parts and accessories for forklifts trucks, low-speed electric vehicles, and auxiliary material handling equipment with a guaranteed high-performance product at the most competitive price.
Our products use high quality materials and advanced technology with good quality, strong durability, high reliability, and can provide perfect after-sales support.

We have many years of experience, accumulated a lot of expertise, familiar with the needs of different markets and we can provide localized services.
Standby for any technicial query on-line or solution after-market.
Our commitment to service, knowledge and product availability has made us a One-Stop-Shop for our customers and their business needs.
Our core products are as follows:
- 1. Lead acid Batteries for Electric forklift trucks and Electric vehicles,
- 2. Intelligent automatic battery chargers including industrial frequency and high frequency,
- 3. Regular black and non-marking solid tires for forklifts used at small working fields and warehouses,
- 4. Hydraulic solid tire press machine for mounting and dismounting the solid tires,
- 5. Mobile loading ramp and fixed dock leveler for loading the container and goods,
- 6. Low-speed Electric vehicle with loading platform 1Ton to 3Ton for warehouse/airport/port dock material delivery.
- 7. Many different kinds of golf cart and sightseeing vehicle
FELL FREE TO CONTACT US ! https://www.forkliftbatteryparts.com/
Product Highlights
CZB5C-D48V/55A is a three-phase SCR charger delivering 55A for 48V 320-440Ah lead-acid packs on three- and four-wheel counterbalance trucks, pallet trucks and tow tractors. 4.1 kVA input, 466 x 361 x 785 mm, 62 kg, CE and ISO9001, 15 days delivery.
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.