The Heli VSD8AC is suitable for a 1.5-ton forklift battery, 48V, and the VCD8AC forklift battery manufacturer offers a 4
Product Details
| Type: | Forklift Battery | Application: | Heli Forklift CPD15 |
|---|---|---|---|
| Voltage: | 48 | Capacity (Ah) :: | 400 |
| Battery Type: | Lead-acid Battery | Number Of Monomers (only): | 24 |
| Iron Box Specifications (mm):: | 970*600*465(480) | Material: | Lead, Alloy, PP, Steel |
| Usage: | Forklift | ||
| Highlight |
Forklift Battery Heli VSD8AC,48V Heli VSD8AC |
||
Product Description
The VSD8AC is a dedicated traction battery built for Heli 48V/D-400 applications, delivering a nominal 48V and 400Ah for 1.5 ton electric counterbalance trucks. It uses welded cell connectors instead of bolted links, so the internal resistance stays low and the pack keeps a steady voltage through a full shift of lifting, stacking and travelling. Each unit is filled, formed and capacity tested before shipment, which means it can be put into service as soon as it is lowered into the battery compartment of a CPD10 or CPD15 series truck.
Technical Specifications| Battery Type | Flooded lead acid traction battery |
|---|---|
| Model | VSD8AC / 48V-D-400 |
| Nominal Voltage | 48 V |
| Rated Capacity | 400 Ah (5 hour rate) |
| Cell Configuration | 24 cells in series |
| Connection Method | Welded connector, soft link design |
| Cycle Life | 1500 charge and discharge cycles |
| Self Discharge | Around 5% per year at 25 degrees C |
| Container Dimensions | 890 x 660 x 515 mm (without bottom support) |
| Container Colour | Grey |
| Connector Socket | SB175 grey |
| Cable Length | Positive 1050 mm, negative 650 mm, 50 mm2 section |
| Application | Traction power for electric forklifts |
- Welded soft link design keeps resistance low and reduces the chance of loose connections, which is a common failure point on bolted packs.
- Each pack carries roughly 10% reserve capacity above the nominal rating, so lifting performance does not fade as the battery approaches the end of a shift.
- Only 5% self discharge per year means a stored spare keeps its charge and can be put on a truck without a full recharge cycle.
- Tubular positive plates with glass fibre gauntlets resist deep cycling in multi-shift operations.
- 37 inspection points are checked before packing, including leak test, open circuit voltage and capacity discharge.
- The grey polypropylene container with foam immersion coating resists acid mist and electrolyte creep in damp warehouses.
| Heli counterbalance models | CPD10-Z1, CPD10-Z2, CPD15-Z1, CPD15-Z2 |
|---|---|
| Heli long chassis models | CPD10L-A1, CPD10L-A2, CPD15L-A1, CPD15L-A2 |
| Battery compartment | 890 x 660 x 515 mm without bottom support |
| Connector | SB175 grey, welded cable termination |
This pack is normally specified for 1.5 ton class electric counterbalance forklifts working single or double shifts. Typical installations include:
- Warehouse and distribution centres handling palletised dry goods
- Food and beverage plants where trucks work in chilled or ambient areas
- Manufacturing plants moving raw material and finished goods between lines
- Logistics hubs and third party warehouses with mixed fleet of Heli trucks
- Equipment rental fleets that need a standard, easy to service 48V pack
- Cold storage antechambers where a sealed, low maintenance pack is preferred
- Recharge after every shift and avoid leaving the pack discharged overnight; a full charge takes 8 to 10 hours with a matched 48V charger.
- Check the electrolyte level once a month and top up with distilled water to the marked level, never above it.
- Keep the top cover dry and clean; wipe acid mist residue with a damp cloth to prevent tracking between cells.
- Inspect the SB175 connector and cable lugs every 500 hours for heat marks or looseness.
- Equalise charge once a month if the truck works partial shifts, to keep cell voltages balanced.
- Store spare packs in a ventilated area between 10 and 30 degrees C, and give a boost charge every three months.
- Each battery is wrapped in shock absorbing foam and fixed inside an export plywood case with a pallet base.
- Battery acid is supplied in a separate sealed container when the pack ships dry, or the pack ships filled and formed depending on the destination.
- Cases are strapped and marked with model, capacity, net weight and lifting points.
- Bulk orders are loaded on pallets and braced inside the container to avoid movement in transit.
- Standard lead time is 15 to 25 working days after deposit, depending on quantity and connector requirements.
- Every cell is formed and capacity tested on an automated line before assembly.
- Finished packs pass leak test, polarity check and a full discharge test to confirm the 400Ah rating.
- Products are new and genuine; no refurbished or relabelled cells are used.
- Warranty covers 12 months from the date of delivery against manufacturing defects in plates, container and welding.
- Technical support is available for installation, charger matching and fault diagnosis.




Q1: Which Heli forklift models can use this VSD8AC battery?
It is designed for the Heli CPD10-Z1, CPD10-Z2, CPD15-Z1, CPD15-Z2 and the CPD10L and CPD15L long chassis versions. Please confirm the battery compartment size is 890 x 660 x 515 mm without bottom support before ordering.
Q2: How long does this 48V 400Ah battery last in daily use?
The pack is rated for about 1500 charge and discharge cycles. On a single shift operation with one charge per day, most customers replace it after 4 to 5 years of service.
Q3: Can the connector, cable length or container colour be changed?
Yes. The standard build uses an SB175 grey socket with a 1050 mm positive and 650 mm negative cable. Other sockets, cable lengths and container colours can be produced against your drawing or sample.
Q4: What is the minimum order and the delivery time?
One unit is acceptable for a trial order. Standard production takes 15 to 25 working days, and mixed container orders can be consolidated with other models from our range.
Q5: How often does the battery need watering?
Under normal single shift use, check the level monthly and top up with distilled water. With the optional automatic watering system the interval extends to 4 to 6 times per year.
Product Highlights
The VSD8AC is a dedicated traction battery built for Heli 48V/D-400 applications, delivering a nominal 48V and 400Ah for 1.5 ton electric counterbalance trucks. It uses welded cell connectors instead of bolted links, so the internal resistance stays low and the pack keeps a steady voltage through a ...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.