Heli VSDX400M traction battery pack, 48V 400Ah, specifically for Heli forklift CPD10
Product Details
| Type: | Forklift Battery | Application: | Heli Forklift CPD10 |
|---|---|---|---|
| Voltage: | 48 | Capacity (Ah) :: | 400 |
| Battery Type: | Lead-acid Battery | Number Of Monomers (only): | 24 |
| Iron Box Specifications (mm):: | 970*600*465(480) | Material: | Lead, Alloy, PP, Steel |
| Usage: | Forklift | ||
| Highlight |
48V 400Ah traction battery pack,CPD10 traction battery pack,Heli traction battery pack |
||
Product Description
VSDX400M is the 48V 400Ah pack for Heli CPD10 series trucks with the long chassis bay. It uses the original footprint in a case measuring 970 x 600 x 465 mm, carries roughly a tenth more capacity than the nameplate figure, and ships with cable and socket fitted so the truck is back on the floor within an hour of delivery.
Technical Specifications| Model | VSDX400M long chassis |
|---|---|
| Battery Type | Flooded lead acid traction battery |
| Nominal Voltage | 48 V |
| Rated Capacity | 400 Ah at the 5 hour rate |
| Plate Group | Tubular positive plates with gauntlets |
| Cycle Life | 1500 deep cycles |
| Case Size | 970 x 600 x 465 mm |
| Socket | SB175 grey |
| Cable | Positive 1050 mm, negative 650 mm, 50 mm2 |
| Application | Heli CPD10 traction supply |
- Self discharge is around 5% per year, so a charged spare can sit on the rack for months and still start a shift.
- 37 inspection points are recorded per unit before packing, including open circuit voltage and capacity.
- Epoxy coated container surface resists acid mist and the mechanical knocks of daily battery changes.
- Terminal layout follows the original, so the existing cable run does not need to be rerouted.
- The container is treated against acid creep, which is the usual starting point of corrosion around the lid.
- Perforated PVC sleeved separators slow dendritic growth and keep capacity stable over the cycle life.
| Primary fitment | Heli CPD10 series, long chassis bay |
|---|---|
| Case size | 970 x 600 x 465 mm |
| Connector | SB175 grey |
| Note | Verify bay size before ordering; the standard CPD10 bay is deeper |
This is the CPD10 pack built on the wider long chassis case, which is the version most often confused with the standard 890 x 660 x 515 mm unit.
- Recycling and waste transfer stations
- Food and beverage plants where trucks work in chilled or ambient areas
- Pharmaceutical warehouses with strict cleaning routines
- Agricultural processing plants with seasonal peaks
- Retail distribution centres with narrow aisle racking
- Timber and panel handling operations with long loads
- Charge at the end of every shift rather than waiting for the low battery warning; a full charge takes eight to ten hours.
- Store spare packs in a ventilated area between 10 and 30 degrees C and boost them every three months.
- Never stack tools or metal parts on the battery lid; a short across the terminals destroys the pack instantly.
- Check electrolyte monthly and top up with distilled water after charging, never before.
- Verify charger output voltage annually against the pack specification.
- Timber bracing inside the container stops movement during ocean freight.
- Photographs of the packed goods are sent before the container leaves the factory.
- Bulk orders are palletised, strapped and load planned so weight is distributed across the container floor.
- Fragile marks and this way up arrows are printed on each case.
- A conformity certificate to IEC 60254 is issued with each shipment on request.
- Cells are formed and capacity tested before assembly, with the discharge curve recorded per batch.
- Only new cells are used; no refurbished, relabelled or second hand material.
- Lid seal integrity is tested on a sample basis from every production lot.




Q1: What is the minimum order and the delivery time?
One unit is acceptable for a trial. Standard production takes 15 to 25 working days after deposit, and mixed models can be consolidated in the same container.
Q2: How is a warranty claim handled?
Send the serial number, specific gravity readings for all cells and photos of the affected area. We ship a replacement cell or pack under the warranty terms instead of asking you to return the whole battery.
Q3: Will this VSDX400M fit my Heli CPD10 series trucks with the long chassis bay without modification?
It is built for the bay used by the Heli CPD10 series trucks with the long chassis bay in a case measuring 970 x 600 x 465 mm. Send a photo of the old nameplate and the compartment with a tape measure across the width, and we will confirm terminal position, socket type and cable length before the order is released.
Q4: Can the connector, cable length or container colour be changed?
Yes. The standard build is a grey container with a factory terminated socket; other connector types, cable lengths and colours are produced from your drawing or a sample of the original.
Q5: How often does the battery need watering?
On single shift duty a monthly check is enough. Two shift operations should check every two weeks. An automatic watering system can be fitted if you prefer to remove the task.
Product Highlights
VSDX400M is the 48V 400Ah pack for Heli CPD10 series trucks with the long chassis bay. It uses the original footprint in a case measuring 970 x 600 x 465 mm, carries roughly a tenth more capacity than the nameplate figure, and ships with cable and socket fitted so the truck is back on the floor ...
80v 500AH Screw connection traction Battery Customized For MHE Forklift
80v 500AH Screw connection traction Battery Customized For MHE Forklift Type Forklift Battery Application Electric Forklift Truck Standard DIN standard Width of cell 198mm Technology Tubular Positive Plates Model 80v 500Ah Cell Quantities 40 cells Cell Voltage 2V Connection Type Flexible/Soft ...
Heli CPD20 Forklift Battery 48V 600Ah For Electric Counterbalance Forklift
Product description This battery features small size, light weight, large capacity and long service life. It is designed for exceptional performance and high reliability, and is compatible with over 100 forklift brands and more than 800 models. Our batteries are suitable for various types of ...
24v 280AH Screw connection traction Battery Customized For Heli Forklift
24v 280AH Screw connection traction Battery Customized For Heli Forklift Product Introduction Industrial traction lead-acid battery with stable 1500+ deep discharge cycles, good anti-corrosion & anti-aging performance for heavy continuous operation. REMA or Anderson connectors can be selected freely ...
Forklift Battery Basket Vent Plug
Size M Pallet Jack Battery Vent Plug Filling Caps Durable CE Certification Vent Filling Caps Application Forklift batteries / traction batteries Mode LK-CAP-5 Total Length 74.75mm Size M Product Catalog Model Total Length Vent Filling Caps LK-CAP-4 63mm Vent Filling Caps LK-CAP-5 74.75mm Vent ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.