|Type:||Forklift Battery||Model:||24V 140Ah/5hrs|
|Nominal Capacity:||140Ah/C5||Material:||Lead, Alloy, PP, Steel|
|Plates:||Tubular Positive Plates||Application:||Electric Forklift|
|Standard:||DIN Standard||Certificates:||CE, TLC, ISO9001, ISO14001|
forklift truck batteries,
forklift battery pack
Industrial Forklift Battery 24 Volt Automatic Agitation System Wooden Case Packaging
|Type||Forklift Traction Battery|
|Technology||Tubular Positive Plates|
|Connection Type||Screw connection|
|Steel Tray Size||Customized|
|7PzS350||350||137x198x288x319||21.2||2 or 4||2|
|8PzS400||400||155x198x288x319||24.0||2 or 4||2|
|9PzS450||450||173x198x288x319||26.8||2 or 4||2|
|10PzS500||500||191x198x288x319||29.6||2 or 4||2|
1. High quality flooded lead acid battery
2. >= 1500 times cycle life.
3. High performance tubular positive plates
4. Meet IEC 60254 standard.
5. CE,ISO9001 and ISO14001.
6. Lower distilled water consumption
7. Environmental and healthy
8. Nice design and good quality
9. Easy to use and durable
10. Low current recharge
11. Competitive price
12. Wooden case packaging
13. Automatic watering syste and Agitation system.
14. Larger and thicker plate means less internal corrosion
1. How to do the maintenance of battery?
1) Fill water:fill distilled water or deionized water according to electrolyte level, don’t fill too much distilled water in order to delay filling time, too much distilled water would cause lower specific gravity, electrolyte would spill over,and this situation would corrode metal box and cables, and effect battery’s service life and creepag.
2) Chaging:There is gas when charging, so need to keep ventilative environment, and no naked light. And the oxygen and acidic gas by charging would affect around environment. There would have electric arc when pull out the charging plug, please cut off the charger’s switch and then pull out the plug. There are much hydrogen after finish the charge, naked light is not allowed.
3) Equalizing charge:battery should need a equalizing charge every month(meanssmall charging current but long time charge), in order to keep battery’s capacity and long service life.
Method of equalizing charge:
Firstly charge the battery as regularly, after finish the charge,press the switch of equalizing charge,charge the battery 24-36 hours continuely. Within the equalizing charge,need to make the record of every single cell’s voltage, denstity and temperature, after finish the equalizing charge, need to adjust electrolyte’s density and level as per using manual.
4) Connector,leading wire,cap’s maintenance: must be operated by the professional engineer.
5) Clean:battery should keep surface to be clean, if surface has the dirty things would cause short circuit, also cause terminal and connectors to be corroded. Please use wet cloth to clean battery in order to avoid static electricity.If there is no leakage hole at the bottom of metal box, pleas avoid using water to clean the battery, in order there are too much water to corrode metal box, if there is leakage hole at the bottom of metal box, you can use water to clean the battery.
2. How to do the storage of forklift battery?
1) Storage location:do not make battery short circuit;there would cause short circuit after the rain, must keep the battery in the open air and shady location.
2) Used batter:used battery still have capacity, please keep the battery as per storage method.
3. How about Electrolyte’s operation?
1) Check density:use inhale densimeterto check density, do not spill electrolyte out from the battery, and make sure wear the protective cloth.
2) Other operation: Should refer to professional engineer, especially when fill the electrolyte
3) Electrolyte’s leakage:urgent handle is needed when battery’s turn over or destroy happens.
Contact Person: Molly